Thermoplast adhesive(solvent based) Conventional type and extra strong type Use for:Bonding the cotton, polyester and blended fabrics on the flat manual printing table Specialty:Acrylic copolymer (solvent based)Appearance: Milky aqueous emulsionGood performance of bonding and recycling Package : 10kg per carton. 20kg per bottle.Transportation:See the package, non-dangerous.Storage: one year at 5~30°C in dry and ventilated place, according to the storage requirements, sealed. Application:Cleaning:Polish the table with 0# rubber before rinsing and drying. Better to clean again with the acetone. Coating:Paste the Kraft paper on the four sides of the table and dry it before coating. And then coat the glue evenly on the table for 8-10 times. Keeping enough glue during coating without stop intervals. The drying time maybe be 3-4h..Note:1. Keeping the table clean can get longer usage periods.2. Clean the table with acetone to degrease before another usage.3. Be aware of the possible solvent injury during operation. | | Water –based Table GlueUse for:Bonding the cotton, polyester and blended fabrics on the flat manual printing table Speciality:Acrylic copolymerAppearance: Milky aqueous emulsionGood performance of bonding and recyclingPackage: 20kg per carton.Transportation:See the package, non-dangerous.Storage: one year at 5~30°C in dry and ventilated place, according to the storage requirements, sealed. Application:Usage instruction:Rinse the table and coat the glue evenly on the table. Then print after drying. One coating of the glue can be used for many times.Cleaning:Alcohol can remove this glue.Note:1. Clean the platen with the wet cloth to remove the extra hair and dirt, and then dry it before usage.2. Non-toxic, non-corrosive and non—contaminative3. Wash the used platen with the detergent and soda for 10 minutes, then rinse |
